Picky Pad Beads

Each packet of Picky Pads DIY Beads are recyclable and manufactured under ethical standards.

NOTE: The contents and colours may vary slightly due to availability and computer screen resolutions.

Step 1: Thread your included Anchor Loop through a desired bead and place in the corner of the Picky Pad Mould with the loop hanging out (see image above)

Step 2: Measure your Silicone Goo and Silicone Activator separately. If desired, add 3-10 drops of pigment to the Silicone Goo and mix well.

🚨 NOTE 🚨 If you're adding Speedy Set to accelerate the cure time, replace half of the Silicone Activator at this point with the Speedy Set.

Step 3: Ensure your Picky Pad Mould is clean and dry and fill with desired beads and gently spread out.

Step 4: Combine Activator (and Speedy Set if desired) and Goo and mix well for a full 3 minutes.

Step 5: Pour mixed Silicone Refill Mix slowly into the mould over the beads, ensuring the bead on your Anchor is covered and your Anchor Loop is uncovered.
The Silicone will settle into holes and gaps over the first 1-2 minutes and your mould can be gently topped up at this time.

Step 6: Leave to set on a well ventilated, flat surface for approx. 6 hours before carefully demoulding. If you added Speedy Set, your Picky Pad will be ready to demould in 1 - 2 hours.

🛠️ Demoulding 🛠️ gently pulling the Anchor Loop straight up and towards you. Never use sharp objects to demould as injury could occur.

NOTES: You may need more or less silicone based on the amount of beads yo include. Not suitable for Reusable Picky Pad's. Some wispy fibers may be present due to the manufacturing process.

All components of out Picky Pads are recyclable but if you realllllyy want to do something with them, here are some ideas for the picked beads...

• Make a calm down bottle
• Braid them into your hair and pretend you're in Bali
• Donate them to a school for craft
• Leave them on the floor for an impromptu game of 'The Floor Is Lava'
• Create a bracelet or necklace
• Place them in the shoes of your enemies

Picky Pads ship globally from the closest warehouse located to you, with registered post (includes tracking numbers).

As a general rule shipping times are normally:
🇦🇺 Australia: 2 - 4 Days
🇺🇸 USA: 2 - 6 Days
🇬🇧 UK: 2 - 6 Days
🇳🇿 New Zealand: 2 - 6 Days
🇨🇦 Canada: 2 - 6 Days

Majority of orders are dispatched the same day so you can get it as quickly as possible but delays do sometimes occur during peak periods, sales and promotional periods or if the TikTok gods saw fit to send my content viral...again.

If your order is delayed significantly, I will endeavour to let you know via email as quickly as possible.

⚠️ WARNING ⚠️ This product contains choking hazards and suffocation risks. Not for use by children without adult supervision. Do NOT ingest. Not recommended for people with silicone or latex allergies. Ages 8+.

🚨 ATTENTION 🚨 Silicone components and pigments may cause stains and cannot be removed from fabric or clothing. Always protect clothes, carpets, work surfaces, furniture, skin and other objets. Always use a protective cover to prevent stains. Avoid contact with eyes and skin. Wash with cool water and soap if skin contact occurs.

Thanks to Barry, one of my previous customers, I now need to clarify that Picky Pads, as a whole or in part, should never be used in any bodily orifice. This should be obvious but...this includes rectally. Thanks Baz.